For General Use
Spray affected areas with RP7 and allow 5 minutes for product to penetrate.
To Start Wet Motors (Cars, boats, movers etc)
Remove distributor cap, wipe with a dry rag if soiled and then spray with RP7.
Replace cap and spray around distributor cap, spark plugs, coil, generator, starter motor, leads, etc. RP7 draws out moisture which causes ignition short circuits helps maintain correct electrical performance.
To Penetrate And Loosen
Spray RP7 on seized or stiff joints, nuts, bolts, etc.
Allow 5 minutes to penetrate and if necessary tap lightly. Repeat application if needed in severe cases.
Use RP7 as a general purpose lubricant – eliminate squeaks and keep mechanisms functioning smoothly.
To Protect Against Rust And Corrosion
Simply spray RP7 periodically over nuts, hinges, linkages, garden tools or other metal parts.
RP7 penetrates into confined spaces to displace moisture and protect against rust. RP7 will not harm rubber or paintwork.
The duration of protection obtained using RP7 will vary depending on the type of material being protected and the conditions of exposure.